1. The product mainly supports for switch compatible with Android platform at the same time, and each platform is realized through corresponding key combination switching.
2. The handle is composed of 19 digital keys (up, down, left, right, a, B, x, y, l, LZ, Rb, RZ, L3, R3, -, +, LPOLE,MODE,TURBO) and two analog 3D joysticks.
Battery: lithium ion battery
Working current: 22mA
Battery capacity: 400mAh
Charging voltage: 5V
Service time: about 18 hours
Charging current: 500mA
Size: 153mm * 110mm * 55mm/6.02*4.33*2.16\'\'
1. Applicable platform / equipment:
(1) For Switch equipment
(2) Android device (system version above 4.2)
2. Connection mode
For Switch handle mode
First press B key and then press mode key 1s to enter for Switch handle mode code matching connection. At this time, LED2 mode light on the handle flashes quickly. The specific operations are as follows:
(1) open for Switch host, click the setting menu button in the main page interface, click the system settings option to enter the next level option menu, and then click the airplane mode option, and then click the controller connection (Bluetooth) to turn on the Bluetooth function
(2) enter the Bluetooth pairing mode of the switch handle, open the host homepage interface, click the controllers menu, and then click Change grip / order. The host will automatically search for the pairing handle. After connecting, click the A key and select CLOSE to exit to the main interface for game operation.
Android gamepad handle mode:
Press the Y key and then the mode key 1s to enter the Android handle mode code matching connection. At this time, the LED1 mode light on the handle flashes, search for the device name gamepad, click the device name connection, and the LED1 mode light is always on after the connection.
3. LED indication:
There are 4 LED lights in the handle as charging, low power, mode and Bluetooth pairing indicator.
4. Automatic back connection:
(1) For switch / Android device Bluetooth on, handle off: press the mode key to start the handle, and the handle can be reconnected with the device.
(2) Bluetooth for switch / Android device is turned off, and the handle is turned on: turn on Bluetooth of the device again, and the connection between the handle and the device can be reestablished.
(3) For switch / Android device Bluetooth off, handle off: press the mode key to start the handle, and then turn on the device Bluetooth again, so that the handle and the device can be reconnected.
(4) Note: the above three state handles and devices must have been successfully paired, and the pairing information of the device end is still reserved. After a few seconds, the handle will automatically connect to the switch / Android device. By default, the mode used before the shutdown is on, and the corresponding mode light is always on. If the pairing information of the device end has been deleted, the slow flashing of the online indicator light will last for about 1 minute, and the handle will automatically shut down.
Handle switch on / off / charging / sleeping:
(1) For the switch handle, press the handle MODE key for 1 second to start the machine; long press the MODE key for 7 seconds until the handle indicator light goes out.
(2) when the power is low, the indicator light of the current mode flashes slowly. When the indicator light is normally on after charging through USB connection, it means that the handle is fully charged.
(3) when the power is off, the four mode lights will flash slowly at the same time when the power is charged directly, and the four mode lights will be on normally, and will be off after a period of time.
(4) in the pairing state, if the connection is not successful after more than 1 minute, the handle will shut down automatically.
(5) in the online state, if the handle does not act for more than 5 minutes, the handle will shut down automatically.
When the handle is abnormal, such as key confusion, crash, unable to connect and other faults, you can try to restart the handle.
Reset mode: insert the slim object into the Reset hole on the back of the handle, and press the Reset key to reset the handle status.
Note: Jon-con Handle NOT Included.
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
1 X Wireless Controller
1 X Charging Cable
1 X User Manual