Painting exterior walls can lead to the best outcomes once the right steps are followed. Individuals who love to maintain their home and do the job by themselves will surely enjoy painting exterior walls. They will experience a great day scraping, sanding and preparing the walls before they will climb ladders and mix paint. This is actually the step-by-step process in painting exterior walls.

Scrape the Walls

The exterior walls where you can find chipping old paint should be scraped so that the peeling paint will undoubtedly be removed. Seal the crevices and cracks with spackling compound or painter’s caulk. Then, sand the walls using 100-grit sandpaper until you can achieve smoothness on the wood.

Use Mild Soap and Water to clean the House

You can make use of a pressure sprayer in washing the house; however, you need to be sure that you don’t dig grooves into your wood. Rinse off the soap and invite the wood to dry totally.

外壁塗装 can apply as many primer coasts as you necessary utilizing a wide brush. You need to follow the instructions distributed by the manufacturer.

Apply the Pain

In applying the paint, you should start from the most notable down starting at your fascia boards and eaves. The complete fascia and eaves perimeter should be painted before you start on your walls.

Start the Wall Painting

Begin with a wall area from the most notable with the usage of long horizontal strokes with your brush. Begin in a spot which doesn’t have paint on it and apply the paint toward the area which you painted. This process ought to be repeated until you have applied the first coat. Always follow the instructions of the maker on the next coats.

In painting exterior walls, it is necessary to wear safety glasses constantly. You may also wear something to safeguard your lungs once you sand the walls. Allow spackling compound or painter’s caulk dry totally before you start sanding. This will guarantee that there will be an excellent covering around your trim. Once you have poured paint right into a bucket, be certain that the paint’s lid can be sealed tightly. It is possible to drive a 6d finish nail and make holes round the paint’s rim will assure proper seating of the lid that may preserve your paint ultimately. Finally, it is not a good idea to stroke until your brush will undoubtedly be out of paint because this may bring about uneven coats.